W series

Diameters & Axial Extend

ï»¿

No. of Positions in Hub:	d1	s	Maximum Diameters for Blade Types:
No. of Positions in Hub:	d1	s	1W	2W	3W	5W	6W*	7W	8W	9W*	TR11W
3LP, 4LP, 5LP	200	8	905-911	-	-	-	1158	-	1226	-	-
5, 6	274	15,4	968-985	1240-1251	1785	1120	1232	1536	1300	1785	1250
8	380	15,4	1065-1082	1335-1355	1878-1890	1226	1338	1642	1406	1891	1356
10	470	17	1149-1165	1417-1444	1960-1981	1316	1428	1732	1496	1981	1446
13	630	25	1298-1311	1559-1592	2097-2144	1476	1588	1892	1656	2141	1606

LP = Light duty cast hub. 5, 6, 8 and 10 bladed hubs also come as a reinforced (HP) version for heavy duty applications.
All dimensions are in mm. The values are intended primarily as a guide and can be subject to variations depending on the material. The max. diameter of sickle impellers depends on the blade angle. Contact Multi-Wing or use the Optimiser to get specifics.
* Subtract 185 mm from max diameter in table above for 9W/AL, add 18mm to max diameter for 6W/AL.

Leading edge v±6
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1W	26	29	32	35	39	41*	44*	46*
2W	38	43	47	52*	56*	59*	63*	65*
3W	-	61	68	75	81	87	92	96
5W	-	33	39	45	51	57	62	67
6W	-	-	33	39	45	52	57	63
7W	-	25	30	36	42	47	52	57
8W	14	22	32	41	50	59	68	75
9W	-	30	37	45	52	59	66	72
TR11W	-	40	47	55	61	68	74	80

All dimensions are in mm. The values are intended primarily as a guide and can be subject to variations depending on the material.
* The leading blade tip reaches further out than the leading edge v in it's max. diameter

Trailing edge h±6
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1W	43	50	58	65	74	85	95	105
2W	80	88	102	116	131	144	157	170
3W	-	126	148	170	192	213	232	250
5W	-	62	70	78	85	92	98	103
6W	-	-	68	78	86	95	102	109
7W	-	63	72	81	89	96	103	109
8W	49	58	66	74	81	88	94	100
9W	-	72	84	95	105	115	123	131
TR11W	-	40	47	55	61	68	74	80

All dimensions are in mm. The values are intended primarily as a guide and can be subject to variations depending on the material.