H series

Diameters & Axial Extend

No. of Positions in Hub:	d1	s	Maximum Diameters for Blade Types:
			1H	2H	3H	4H	6H
3	92	10	394	384	570	530	570
6	97	6	422	411	597	557	597
8	134	6	458	448	634	594	634
10	172	7	496	486	672	632	672
12	206	8	528-530	520	706	666	706
14	242	8	563-566	556	742	702	742

The max. diameter of sickle impellers depends on the blade angle. Contact Multi-Wing or use the Optimiser to get specifics.

Leading edge v±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1H	-	-	14	17	19	20	21	23
2H	-	-	11	13	15	17	19	-
3H	-	-	13	15	18	21	24	26
4H	-	-	13	15	17	19	21	23
6H	3	5	8	11	13	17	20	-

All dimensions are in mm. The values are intended primarily as a guide and can be subject to variations depending on the material.

Trailing edge h±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1H	-	-	34	39	44	47	50	53
2H	-	-	20	23	25	28	30	-
3H	-	-	29	32	34	38	41	45
4H	-	-	37	42	47	52	57	61
6H	16	19	21	23	25	27	29	-

All dimensions are in mm. The values are intended primarily as a guide and can be subject to variations depending on the material.