Heating, ventilation and refrigeration
Multi-Wing’s wet or dry cooling tower fans provide low noise, consistent airspeed, significant savings in operational costs, and deliver precise performance. Our fans used in induced or forced draft cooling towers excel in 100% up-time durability, effectiveness in terms of UV & corrosion protection and are compliant with ErP 2015 and ErP 2020.
Best suitable Multi-Wing solutions for small, medium or large cooling towers:
- EMAX4 and 7Z / 7Z2, diameters 560–1020mm, suitable for ƐPS
- 6W, 3W, 9W, 10G, diameters 1000–2746mm, suitable for ƐPS
High Efficiency l Low Operational Cost l Low Noise and Vibration l UV & Corrosion Proof l Wet or Dry Cooling Tower Usage l Induced or Forced Draft Cooling Tower Fit l ErP 2015 & 2020 Compliant
Multi-Wing’s axial fans ensure not only maximum airflow with low noise but also more efficient cooling and freezing for V-type and flatbed condensers. Smooth and optimal running condensers require variable rpm, UV and corrosion resistance and VFD ready axial fans for efficient direct drive. Each custom-made axial fan features our special blade profile design, enabling greater efficiency, lower operational costs, and noise reduction. All Multi-Wing axial fans for V-type or flatbed condensers are ErP 2015 and ErP 2020 compliant.
Best suitable Multi-Wing solutions for V-type and flatbed condensers:
- EMAX4 and 7Z / 7Z2, diameters 560–1020mm, suitable for ƐPS
- 1W, 2W, 8W, diameters 650–1450mm, suitable for ƐPS
High Efficiency l Low Operational Cost l VFD Ready l Low Noise l UV & Corrosion Proof l Any Large or Small Need l Efficient Direct Drive l ErP 2015 & 2020 Compliant
Heat Exchangers & Dry Coolers
Multi-Wing’s custom-made axial fans provide high efficiency through maximum airflow with low noise in any industrial cooling heat exchanger. The correct choice of the blade material optimizes UV-radiation and minimizes corrosion in demanding climate conditions. Our axial fans designed for V-shape, flatbed or vertical heat exchangers are ErP 2015 and ErP 2020 efficiency compliant.
Best suitable Multi-Wing solutions for V-shape, flatbed or vertical heat exchangers:
- EMAX4, 7Z / 7Z2, diameter 560–1020mm, suitable for ƐPS
- 1W, 2W, 8W, diameter 650–1450mm, suitable for ƐPS
High Efficiency l Maximum Airflow with Low Noise l l UV & Corrosion Proof l ErP 2015 & ErP 2020 Compliant l VFD Ready l Variable rpm
Multi-Wing’s custom-made axial fans efficiently facilitate proper cooling and freezing in blast freezer, ceiling mount, and floor mount evaporators. The combination of high-quality materials, accurate balancing and correct fan choice creates high throw, reduced vibrations and is a suitable fit for very low ambient temperatures. Multi-Wing fans used within compact evaporators produce low noise and feature a hygienic design which allows for easy cleaning. Multi-Wing’s axial fans prevent the onset of corrosion within evaporators and are ErP 2015 compliant.
Best suitable Multi-Wing solutions for blast freezer, ceiling mount or floor mount evaporators:
- EMAX4, 3Z, 2Z2, diameters 320–630mm
- 5W, 6W, 7Z / 7Z2, 8W, diameters 630–1250mm
High Efficiency l Low Operational Cost l Low Noise l Very Low Ambient Temperature Approved l Easily Cleaned l High Corrosion Resistance l ErP 2015 Compliance
Maximum airflow / low pressure Multi-Wing axial fans make the perfect solution for any standardized or customized livestock ventilation unit. Our fans are ideal for agricultural ventilation as they accommodate a temperature range from -40°C up to +60°C, -40°F up to +140°F. Our high energy efficiency, lightweight designed custom-made fans generate energy efficiency through maximum CFM/Watt or minimum W/1000m3/h.
The axial fans’ corrosion resistant materials are perfect for the rough environments of high-performance agricultural applications.
Best suitable Multi-Wing solutions for any livestock ventilation:
- Medium size fans EMAX4, 4Z, 5Z, diameter 560–915mm, suitable for ƐPS
- Large size fans 6W, 9W, diameters 1250–1980mm, suitable for ƐPS
High Efficiency l Low Operational Cost l Low Noise l Corrosion Resistant Materials l High CFM per Watt Output l UV Resistant
Smoke & heat Control Systems
Designed for Smoke and Heat Control Systems, Multi-Wing custom axial fans are EN12101-3: 2015 compliant and capable of heat resistance at 400 °C for up to two hours. Our stress optimized design features special reinforced high strength hubs and blades. Tensile and centrifugal stress reports are available.
Best suitable Multi-Wing solutions for small and large smoke & heat control systems:
- 3C, diameter 450–800mm
- 5W, diameter 900–1250mm
Heat Resistance l Stress Optimized Design l EN 1210-3: 2015 Compliance
Wood Dryers & Drying Kilns
Wood dryers demand a homogeneous drying indoor environment with high humidity and high ambient temperatures. Multi-Wing’s tailored-made axial fans ensure high temperatures from 100–230°C, or 212–446°F, and produce equal air-flow and pressure for perfectly consistent, homogenous wood drying results. Our true reversible fans for conventional / batch kilns save energy while meeting high efficiency rates and stay corrosion resistant. Multi-Wing’s fans are built from industrial strength materials to ensure the durability necessary to perform under extreme heat. Fans used in wood dryers are durable, use corrosion-resistant aluminum blades, feature stainless-steel fasteners and exceed ErP 2015 efficiency requirements.
Best suitable Multi-Wing solutions for batch, continuous and vacuum drying kilns:
- TR7Z, TR8Z, TR11W, diameters 800–1250mm
- 5W, 6W, diameters 800–1400mm
Energy Savings l Highest Static Efficiency l High Quality Materials l Aluminum Blades l Stainless Steel Fasteners l Corrosion Proof l ErP 2015 Compliance
Multi-Wing’s grain drying fans are built from industrial strength aluminum, to ensure durability, low noise and high static pressure under intense heat. Our custom-made axial fans provide the necessary high static pressure for excellent performance and we offer powder coating for high corrosion resistance.
Best suitable Multi-Wing solutions for bin / batch dryer and continuous flow dryer:
- EMAX4, 5Z, diameter 560–915mm, suitable for ƐPS
- 5W, 6W, diameters 800–1250mm, suitable for ƐPS
High Static Pressure l Energy Efficient l Low Noise l Corrosion Proof l Durability
Multi-Wing’s custom axial fans fit perfectly into rail HVAC, rail compressors, locomotive or rail replacement. Fans for rail transportation must be robust, durable (100% up-time), and resistant to corrosion. Multi-Wing’s custom axial fans for rail applications use PAGV1 low flammability blade material, produce low noise, can be used reversibly and are EN45545 compliant.
Best suitable Multi-Wing solutions for rail HVAC, compressor, locomotive and rail replacement:
- 1H, 4H, EMAX4, 2Z2, 7Z, diameter 350–800mm
- 1H, 4H, PMAX3, diameter 380–640mm, BM clutches available
- 5W, 6W, 9W2, diameter 800–1800mm
Low Flammability l EN45545 Compliance l Safety l Corrosion Proof l Low Noise l 100% Up-time Durability
Industrial cooling and ventilation for Wind Turbines require durable fans capable of 100% up-time. Multi-Wing’s custom axial fans are ErP 2015 compliant, resistant to onshore and offshore corrosion, and perform with low noise and vibration.
Best suitable Multi-Wing solutions for onshore and offshore wind turbines:
- 1H, 4H, diameter 450–630mm, suitable for ƐPS
- EMAX4, 2Z2, 1W, 6W, 7Z / 7Z2, 8W, diameter 560–1250mm, suitable for ƐPS
Low Noise l On-shore / Off-shore l Maximum Corrosion Resistance l 100% Up-time Durability l ErP 2015 Compliance